Ultrasonic Hand

Basic Info.

Power	High Frequency
After-Sale	Oversea Service
Weight	100kg
Frequency	15kHz / 20 kHz / 35kHz ./ 40kHz
Control System	Touch Screen Intelligent
Usage	Plastic Welding
Welding Route	up to 100mm
Transport Package	Export Wooden Packing
Specification	800x 950x 1900mm
Trademark	BONNE
Origin	Wuxi, China
HS Code	8515809090
Production Capacity	10000 / Year

Product Description

Ultrasonic Plastic Welding Equipment
Principle of ultrasonic plastic welding
When the ultrasonic wave acts on the thermoplastic plastic contact surface, it will produce tens of thousands of high-frequency vibrations per second. This kind of high-frequency vibration with a certain amplitude will transmit the ultrasonic energy to the welding area through the upper weldment. Because the welding area is two The acoustic resistance is large at the welding interface, so local high temperature will be generated. In addition, due to the poor thermal conductivity of the plastic, it cannot be distributed in time for a while, and it gathers in the welding area, causing the contact surface of the two plastics to melt rapidly, and after a certain pressure is applied, it merges into one. When the ultrasonic stops, let the pressure continue for a few seconds to make it solidify and shape, thus forming a strong molecular chain, achieving the purpose of welding, and the welding strength can be close to the strength of the raw material. The quality of ultrasonic plastic welding depends on three factors: the amplitude of the transducer's welding head, the applied pressure and the welding time. The welding time and welding head pressure can be adjusted, and the amplitude is determined by the transducer and the horn. There is an appropriate value for the interaction of these three quantities. When the energy exceeds the appropriate value, the melting amount of the plastic is large and the welded material is easily deformed; if the energy is small, it is not easy to weld firmly and the applied pressure cannot be too large. The optimal pressure is the product of the side length of the welded part and the optimal pressure per 1mm of the edge.
Welding advantages
Advantages of ultrasonic plastic welding: fast welding speed, high welding strength and good sealing;
Replace the traditional welding/bonding process, low cost, clean and pollution-free, and will not damage the workpiece;
The welding process is stable, and all welding parameters can be tracked and monitored through the software system. Once a fault is found, it is easy to eliminate and maintain.

Ultrasonic Hand-Held Spot Welder Ultrasonic Plastic Welding Machine for Food Cutter for Nylon Wire Riviting Welder

components for ultrasonic welding machine

Ultrasonic Hand-Held Spot Welder Ultrasonic Plastic Welding Machine for Food Cutter for Nylon Wire Riviting Welder

Ultrasonic welding
Thermoplastics are a welding method in which two plastics are welded together due to the friction and heat generated by the surface molecules under the action of ultrasonic vibration.
Note for welding of thermoplastics:
A. The tongue and tongue design ensures convenient alignment during the welding cycle.
B. The welding wire is designed to be slender, but there must be enough meltable material to fuse the welding surface. The specific design method depends on what kind of workpiece equipment is used for welding. Welding pressure, vibration amplitude and other parameters are adjustable to ensure that the welding head can contact the welding surface and apply pressure. The lower workpiece is the pressure-receiving part and is placed in the bottom mold without moving. The welding head produces high-frequency ultrasonic waves, which makes the upper workpiece heat and vibrate, so that it can fuse with the lower workpiece. After the welding head stops vibrating, the pressure is maintained to cool the melting position. The entire welding time is mostly less than one second.

Model	FU 2025 P	PTS-2000	DS 300	DS 400
Frequency	15-35 KHZ	15-40 KHZ	15-20 KHZ	15-40 KHZ
Power	1200-3200W	800-4200W	4200-6000W	800-4200W
Pressure	0.1-1.0 MPA	0.1-1.0 MPA	0.1-1.0 MPA	0.1-1.0 MPA
Voltage input	AC220-240V	AC220-240V	AC220-240V	AC220-240V
Welding route	100 mm	75-100 mm	100 mm	75-100 mm
Output time	0.01-9.99 S	0.01-9.99 S	0.01-9.99 S	0.01-9.99 S
Working mode	Time/ground/energy/depth/pressure mode	Time / ground / ressure mode	Time / ground / ressure mode	Time / ground / ressure mode
Lifting method	Linear slide electric lifting system	Linear slide electric lifting system
Size	600x600x 1250 mm	600x600x 1250 mm	750x800x 2000 mm	650x570x 1100 mm
Intelligent management	Amplitude/Quality/Data/Safety Management	Amplitude/Quality/Data/Safety Management	Amplitude/Quality/Data/Safety Management	Amplitude/Quality/Data/Safety Management
weight	85 KG	120 KG	350 KG	100 KG
Generator circuit	Digital intelligent auto frequency tracking / Circuit constant voltage	Digital intelligent automatic frequency tracking	Digital intelligent automatic frequency tracking	Digital intelligent automatic frequency tracking
Control system	BONNESONIC	BONNESONIC	BONNESONIC	BONNESONIC
Control mode	Button/External Control Mode	Button/External Control Mode	Button/External Control Mode	Button/External Control Mode
language	Chinese/ English	Chinese/ English	Chinese/ English	Chinese/ English
Safety management	password protection	password protection	password protection	password protection
Operation interface	10 Inch external touch screen	7 Inch external touch screen	4.3Inch external touch screen	4.3Inch external touch screen
Feature	USB data export/welding record/data statistics	USB data export/welding record/data statistics	welding record/data statistics	welding record/data statistics

Ultrasonic welding machine with touch screen

Ultrasonic Hand-Held Spot Welder Ultrasonic Plastic Welding Machine for Food Cutter for Nylon Wire Riviting Welder

Packing for shipment

Why choose bonne?
We firmly believe that we have excellent ultrasonic welding solutions for every application.
In addition to accuracy, strength and minimum particle release, process verification and traceability are also important quality standards. Ultrasonic welding is considered the most suitable joining technique.
From the initial idea to actual application and development, to process optimization, bonne will go hand in hand with you to provide you with the best solution.

Products

Basic Info.

Product Description